Helmets & Driving Gear Kart Kit & H.S. Program B.R.E. Products 2-Cycle Engines & Services 4-cycle Engines & Services CRG Karts Parts & Accessories
Yard & Off Road Kart Learn More About Us Home Page

Oudoor Power Equipment Services Unlimited All-Stars
The B.R.E. Kart Kit and High School Karting Program
 

Proud to be a sponsor of the Carrick Kart Club		 Click here to learn about the Carrick High School Go-kart Building and Racing Club

 
rear corner of kit kart
many of the kit components left front wheel and tie rod

 
The B.R.E. Kart Kit comes with everything that you need to build your own high quality, single seat, live axle kart.  The high quality, MIG welded, frame is sturdy and is made to last.  Nothing but the best components are used in this kit.  Some of the parts are the same ones that are used on the best competition karts.

The B.R.E. Kart Kit is designed for engines up to 6 horsepower.  The engine, clutch and chain guard IS NOT INCLUDED with the kit and must be purchased separately.

Because this is a kit, that was designed for educational purposes, and as a parent/child project, all of the painting and preparation for painting, some drilling, filing and sanding is left undone.  All of the welding and machine work is finished when the kit is supplied to you, so you don't have to worry about that.  The seat cushions must also be assembled and installed.  It is a lot of work, but when you are finished, you will be proud of the top quality kart that you put together.
 Complete kit only $575  (quantity discounts are available, just email; bergfelt@bellatlantic.net or call (724) 847-3677 for info.

Coming soon, off-road, bolt-on brush bar/cage kit

Also coming soon, competition roll bars, bumpers and nerf bar kits.

Parts List  (Prices only accurate Fall 2002)
 
2002001 chassis, bare, no components  275.00
2002002  axle, shaft, 3/4" diameter, steel  39.00
225-164  axle bushing, 3/4" id, 1" od, 1  7/8" long  3.91
2002003    steering column  15.00
5890    steering wheel, 10" diameter 15.64
9396   steering wheel, 12" diameter   19.35
2002006   3/4 split aluminum collar  5.00
K010CRE  steering column suport 3/4" (K010CBK)   3.00
K153BBK  hub for steering wheel, nylon, 3/4"  4.00
2237  spindle, right side  16.95
2238    spindle, left side  16.95
8447  kingpin bolt, 5/8-18 x 3.25  1.65
8515 kingpin nut, 5/8-18 nylon locknut  .36
8215   spindle bushing, Nyliner   .56
8221  tie rod end bearing, 5/16 female  6.25
2002004 tie rod, steel 5/16 7.00
1806  brake pedal  5.00
1811 throttle pedal 5.00
2002005  throttle control rod  7.00
292322  throttle cable pull 3.20
295-279 conduit clip, cable clamp  .89
261  throttle cable 2.95
264  brake cable  3.50
K121B  brake cable clamp with side screw  2.50
8373  1/4 x 1 fender washer to hold throttle cable ball .25
2390 throttle return spring  5/16 x 3-1/8 1.00
355KY-ST-34  rear wheel, hub tire, tube assembly 45.00
H-452  hub for brake drum and sprocket (also wheel)  15.00
160-059  rear tire, replacement, 4.10-3.50x5 15.10
170-019  rear inner tube, replacement, 5"  6.35
260-059  72 tooth steel sprocket (power)  11.36
260-042 60 tooth sprocket (speed)  9.55
2002007 chain, #35 standard  8.50
250-084 #35 master link  1.00
260-133 brake band  16.00
260-141  brake drum 4.63
2002008 brake band anchor bolt assy.   4.50
8377 front wheel rim 9.95
2002009 5/8 precision front wheel bearing  5.00
160-002 front tire, 4.10-3.50 x 4, stud tread  12.40
170-001 front inner tube, 4.10 - 3.50 x 4  5.70
2002009 plastic for floor and seat back  6.00
7728 safety, engine shut-off switch  4.20
163  grease fitting, straight 1/4-28 .75
119  1/4-28 set screw .30
5600 3/16 x 12" keystock ( cut to length) 1.05

Chain Wax, chain lubricant 6.95

Phone-in, fax, or e-mail your order to; (724) 847-3677, fax (724) 847-1566,
e-mail; info@bergfeltracing.com
 Official PayPal Sealcredit cards that we accept

 

The B.R.E. Kart Kit and the High School Racing Program
This kit was originally developed so that students who did not have access to to a complete power technology and machine and fabricating shop could get involved in the high school kart racing that has been developed by Mark Bergfelt first at Oliver High School, then South Vo-Tech. High School and then Carrick High School.  All of the schools are in Pittsburgh.  This program started at Oliver in 1989, when students in Mark's classes first built their karts at school and then competed at Blanket Hill Speedway.  Since Mark is now assigned to Carrick, the current program is based there as well as at BRE.  Unfortunately, the teachers that replaced Mark at the previous schools chose not to continue on.  It has also been difficult to get other schools on board.  In response, the kit was developed, so that individual students, and home schooled students could participate.  This kit is a great way to introduce technology education into a home school curriculum.  By all means, any technology or vocational teacher is welcome to inquire about starting this exciting program at their school.
 
Proud to be a sponsor of the Carrick High School Go-Kart Building and Racing Club Click here to learn about the Carrick Kart Club